PRESSURE REGULATORS

  • Compact Design

  • Piston and Diaphragm Sensed Options Available

  • 1.6 µm Internal Surface Finish as Standard

  • Cleaned for Oxygen Service

  • Bubble Tight Shut-off

  • NACE Compliant Designs are Available

  • Self Venting

  • Capture vent

  • Panel Mount Kit

  • Relief Valve

End Connections

  • ¼” NPTF/BSP as Standard
  • ½” NPT/BSP for Higher Flow Rates

Pressure Control Ranges

  • 0 to 10 psig through 0 to 500 psig (Diaphragm Sensed)
  • 0 to 3600 psig (Piston Sensed)

Valve Seats

  • PEEK , PCTFE, PTFE ( As per pressure & Nature of Fluid Media)

O Ring Seals

  • FKM

Lubricants

  • Hydrocarbon-based (Non Wetted) , PTFE-based (Wetted)

Flow Coefficient (C V)

  • 0.06 and 0.2

Design Pressure

  • 1.5 Times of Working Pressure

Materials of Construction

  • Stainless Steel for Corrosive Media Brass for Non-Corrosive Industrial gases

Certifications

  • Helium Leak Certification on request NACE Compliant Certificates on request

Relevant Standards

  • Pressure Rating – As per Criteria of ANSI/ASME B31.3
  • Cleaning – ASTM G93
  • Threads – ANSI B1.20.1
  • Inlet Connections – As per IS 3224 (CGA / DIN/BS on Request)
  • NACE MR0175/ISO 15156 (On Request)
  • Specialty & Industrial Gas Cylinder Regulator

  • Laboratory and Point of Use Gas Systems

  • Sampling Systems, Zero, Span & Calibration Analyzer Gases

  • Gas & Liquid Chromatography

  • Hydrocarbon Services

  • Cryogenic Gases

  • Oil & Gas

  • Chemical & Petrochemical

  • Process & Analytical Industry

Note: – As a drive for continuous improvements of our products, Powerlok reserves the right to change the descriptions contained in this brochure without prior notice. Consult local Agent or Factory for revisions and/or service related issues.